Antenna Systems & Solutions, Inc. is pleased to present the following steel tubing from ROHN. Be sure to read all he notes before making your purchase. You can also view the part spec sheets by clicking on the part number. If you have any questions, feel free to contact us.

Steel Tubing

ROHN Steel Tubing comes in a variety of end types, finishes, gauges and lengths. So whatever your needs, we have the steel tubing to fit every job.

End Types

Swaged - ROHN swaged tubing with locking joint is available in two finishes and four gauges. When tubing is swaged, the metal is compressed and made thicker so the joint is stronger than the original material. In fact, so strong that 18 ga. swaged tubing has the strength of most competitive 16 ga. tubing. Swaging also eliminates the “joint bulge” common with expanded tubing.

Expanded - A tube with an expanded end along with a tube with a plain end allows the tubes to be stacked.

Plain End - Tubes with a plain end cannot be stacked if they are used directly in a tripod, wall mount, etc.

Finishes

Hot Dip Galvanized - This tubing is fabricated from high strength steel - then immersed in molten zinc giving all surfaces, including the interior, an even coating of zinc for maximum corrosion protection. No seams, holes or edges are coated.

Pre-Galvanized - This tubing is made from a coil of steel which is galvanized at the steel mill, cut into strips, and then formed into a piece of tubing. Where the tubing is welded, zinc is sprayed over the weld to give it protection at that point. It does, however, have a slightly uncoated seam on the inside and ends.

Gauges

ROHN offers steel tubing in 16, 18, and 20 gauges.

Lengths

Steel tubing lengths are available from 2 1/2” to 10’.