Four Legged Towers from Swager

Antenna Systems & Solutions, Inc. is pleased to preset the following products from Swager Comunications. If you have any questions, please feel free to contact us.

Beacon Towers

60-foot Non-Directional Beacon Tower (NDB) includes all necessary hardware including base insulator. Manufactured per TIA/EIA-222-F for 150 mph survival wind speed.

Glide Slope Towers

Self-supporting tower from Swager has a 36-inch uniform face width. Includes face-mounted climbing ladder and rigid safety climbing rail (Climber's Buddy Aluminum Safety-Climb System). Manufactured per TIA/EIA-222-F for 100 mph basic wind and 1/2-inch radial ice.

Vertical Legs are 2-1/2" Sch 40 Pipe
Horizontals are 3/4"Ø A36 Solid Round
Diagonals are 1-1/8"Ø A 36 Solid Round and Z-Braced.

Guyed Towers

300-foot 3-legged guyed tower. Manufactured per TIA-EIA-222-F for 80 mph basic wind and 1/2" of radial ice concurrent with 21 sq. ft. antenna load. Towers are available in other sizes and heights.

Radar Towers

AB-1768/F WITH OVERHANG

One (1) 17-foot standard, galvanized top section with all necessary hardware, overhang, and standard radar pedestal.

AB-1768/F W/O OVERHANG

One (1) 17-foot standard, galvanized top section with all necessary hardware and standard radar pedestal.

Also has 10-foot sections that allow the Radar Towers to go up to 87-foot tall (in 10 foot increments).

RTR/GP Series Towers

Self-supporting, 4-legged GP-Series RTR Tower with a 48-inch O.C. uniform face width. Includes rigid safety climbing rail. Manufactured per TIA/EIA-222-F for 100 mph basic wind and 1/2-inch radial ice.

Comes in 20-foot through 70-foot tower elevations (40-foot tower shown)

Self Supporting Towers

PA- and SA-Series 3-legged self-supporting towers. Manufactured per TIA/EIA-222-F for 80-120 mph basic wind and 1/2" of radial ice concurrent with 20 sq. ft. antenna load. Towers are available in other sizes and heights. Vertical Legs are SCH 40 and 80 Pipe. Diagonals are all X-braced.