|
3’4” Short Base
SB25G
Base section for embedment in
concrete.
Price: $82.50
3’4” Hinged Short Base
SBH25G
Base section for embedment in
concrete. Hinged connection to
bottom.
Price: $260.00
Price: $162 |
|
Concrete Base Plate
BPC25G*
For use with pier pin embedded in
concrete.
Price:$81.40
Pier Pin
3/4X12PP
Must be ordered separately. |
|
Single Drive-In Base
SDB25G*
To be driven directly into ground.
Price:$220.00 |
|
Peak Roof Mount
PR25G
Adjustable hinged feet conform to
nearly any roof pitch. Bolts to roof
surface.
Price:$486.20
|
|
Flat Roof Mount
FR25G*
Bolts directly to flat roof surface.
Price:$372.90 |
|
Hinged Base Plate
BPH25G*
Bolts to concrete. Hinged to allow
tower to be rotated up from base
during installation.
Price:$283.80
Base Bolts
1/2X12BB
Must be ordered separately. |
|
DBS Antenna Support
KY2068A16
1.66” O.D. mounting tube
Price:$134.20
KY2068A15
1.5” O.D. mounting tube
Price:$136.40
KY2068A2
2” STD/2-3/8” O.D. mounting pipe
Above assemblies are hot dip
galvanized. Antenna Support
Assembly includes support
brackets, clamps, and mounting
pipe. Below assemblies are
pre-galvanized.
Price:$149.60
DDM166
1.66” O.D. mounting pipe
Price:$202.40
DDM150
1.5” O.D. ,mounting pipe
Price:$184.80
DDM238
2” STD/2-3/8” O.D. mounting
pipe
Price:$212.30 |
|
90 Degree Joints
2590MM
Price:$258.50
2590FM
Price:$270.60
2590FF
Price:$173.80
Unique 90 degree joints allows the
connection of 25G sections for a
variety of purposes. Popular in
theatrical staging and overhead
lighting.
Joint styles include (2590MM) both
ends swaged, (2590FF) both ends
open, and (2590FM) a
combination one end swaged the
other open.
Joints are not drilled where they
slip fit to 25G sections. Can be
filed drilled or custom connected to
meet particular needs. |
|
Adjustable House Bracket
HB25AG 0-15"
Price:$126.36
HB52BG 0-24"(not shown)
Price:$165.24
HB25CG 0-36"(not Shown)
Price:$163.08
|
 |
Side Arm Bracket
SA253UA
Provides3' stand-off from tower.
Distance from top to bottom bracket adjustable depending depending on length of antenna mounting tube. Mounting Tube provide is 3' long, 2-1/4" O.D.
Price:$202.40 |
 |
Heavy Duty Universal House Bracket
HBUTVRO
Adjustable to position tower from
18” to 36” from wall.
Price:$288.20 |
|
Side Arm Mount
UHF25G
For UHF & FM antennas. Fastens
with saddle clamps (shown in
SA253UA drawing above).
Price:$34.87 |
|
Universal Eave Bracket
EB2525G
Hinged connection allows tower leg
clamps to remain perpendicular to ground while bolt-down supports
rotate to lay flat along pitched roof
or eave.
Price:$104.50 |
 |
(Left)
Top Dish Mount
25TDMKD
Top plate includes built in guy lugs.
Bolts to swaged top of standard
section. Lower plate connects with
U-bolts. Set screws secure
mounting pipe. (See drawing C850314R1) for mast sizes and assembly.)
Price:$735.48
(Right)
Face Dish Mount
DM25G2
Mounting pipe included is 5’ long,
2” STD.
Price:$229.90 |
|
Guy Bracket
GA25GD
Mounts to any tower at any horizontal brace.
Torque Bars
TB25D (not shown)
Optional, for use with GA25GD
Price:$148.50 |
|
Torque Arm Stabilizer
Assembly
TA25
Anti-twist device located in the area
of antennas. Provides six-way
guying. Bolts to tower at any
section joint. Attached with joint
bolts. Must be installed as sections
are joined together.
Price:$308.00 |
|
Universal House Bracket
HBU
Adjustable to position tower from
6” to 30” from wall.
Price:$282.96 |
|
Safety Ring
SR245
Snaps into place at any level. No
bolts required.
Price:$1082.40 |
|
Work Platform
WP25G
Snaps into place at any level. No
bolts required.
Price:$165.00 |
The 25G is available in the standard 10’ section length and a 7’ length which is UPS shippable. The 25G uses double bolted joints, proven to be the best method of joining tower sections
for sturdiness and dependability. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure,
the 25G can rise to a maximum of 190 feet. Self supporting and bracketed heights depend on loading.
