 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Search this site... |
|
|
|
|
|
We are a proud member of NATE National Association
|
Home >E.O.D. Tools > Disrupters > Disrupter WD-29
| Disrupter WD-29 | |||||||
 |
|||||||
Technical Specifications |
|||||||
| Dimensions of the clasped mount |
length 800 mm / width 210 mm / height 250 mm | ||||||
| Dimension of the base when not clasped | width 1000 mm / height up to 800mm | ||||||
| Number of barrels of the same cylinder | 1 or 2 | ||||||
| The volume of the water loading | 0.06 dm3 | ||||||
| The weight of the base (without barrels, cartridge and water loading) | 8 kg | ||||||
| Cartridge caliber | 29 mm | ||||||
| Detonating mode | electrical | ||||||
| Description The disrupter WD-29 consists of the universal adjustable base, which serves as a barrel carrier.The mount consists of two collapsible floor limbs and two height adjustable limbs.The adjustable joints enable the unit to be directed to nay desired spot of the device to be destructed.The limbs are constructed of the lightweight alloy and the other parts of the base of stainless steel, protected from corrosion and dulled to reduce the light reflection.The barrels for WD-29 are made of high tensile steel protected against corrosion. The barrel WD-29 chambers the integrated cartridge NWD-29 with an aluminum body and the black powder load of 10g for the av-grade cartridge or 15g for the dv-grade cartridge behind 0.061 of water in a PVC envelope. The plug is sealed to the bottom end of the barrel.The prepared barrel is fixed on the adjustable mount and is ready to be electrically fired.The mine cable with connectors and the detonator EDK-700 are used for detonating the cartridge.The 100 m long mine cable and machine EDK-700 are the main components of the mine and disarm blasting set. All parts of the disrupter should be carefully cleaned after use. The disrupter WD-29 is collapsible. When clasped the disrupter should be kept in the transport bag. |
|||||||
|
|||||||
