PA-5820-104
 Highlights:
- 5 ~ 5.8GHz; 802.11a
- Cost-effective Plastic Outdoor,
Wi-Fi AP/Client/Repeater/Bridge
- 5~5.8GHz/2.4GHz, dual frequency kernel
- IEEE 802.11a/b/g compliant
- 4 operating mode: Wi-Fi AP/Client/Repeater/Bridge
- Cost-effective Plastic Outdoor Solution (Weather-proof, -15c ~ 65c)
- POE design, least gain lost, highest efficient with reliability
- Advanced network security with 64/128/152 bit WEP, WPA, WPA-PSK, and WPA2
- Support DFS, TPC, 4 x multiplied SSID
- 5 levels of transmit power adjustment
- Indication of ‘connection status’ for antenna alignment
- Plastic Outdoor unit, water-proof, operating under -15C ~ 65C
- Least gain loss of antennas, highest transmission efficiency
- POE (Power over Ethernet) design, best performance with most stability
Specification |
| Standard |
IEEE 802.11a/b/g; IEEE802.3; IEEE802.3U; IEEE802.3AF |
| Output power |
100Mw/20 dBm
5 levels of power adjustment |
| In-built Antenna |
5.1~5.9GHz full band, flat panel, 18-dbi
Beamwidth: 30-degree (horizon and vertical) |
| Frequency |
802.11a: |
5.15 ~ 5.25 (lower band)
5.35 ~ 5.5 (middle band)
5.725~5.825(hi-band) |
| 802.11b/g: |
America/FCC: 2.412 ~2.462GHz (11 ch)
Europe CE/ETSI: 2.412~2.472 GHz (13 ch) |
| Modulation |
802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAM
802.11b: CCK, DQPSK, DBPSK
802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Signal type |
DSSS/OFDM |
| Operating Mode |
AP/Client/Repeater/Bridge |
| Sensitivity/Bandwidth |
802.11a: 6/9/12/18/24/36/48/54 and 108Mbps;
802.11b: 1/2/ 5.5/11Mbps;
802.11g: 6/9/12/18/24/36/48/54 and 108Mbps; |
| Sensitivity/Bandwidth |
802.11a: -70dBm@54Mbps PER<10%
802.11b: -86dBm@11Mbps PER<8%
802.11g: -72dBm@54Mbps PER<10% |
| SDRAM |
32MB |
| FLASH |
8MB |
| Operating Temperature |
-15c ~ 65c |
| Connector Type |
Ethernet: 10/100 Base T (RJ-45)
Antenna: reverse N-type, female |
| Security |
64/128/152 bit WEP, WPA, WPA-PS, WPA2 |
| OS support |
Windows 2000/XP |
| Software/Firmware Support |
I.E. access, Site Survey, Suppressed SSID, DFS/TPC, VLAN, 4 x multiplied SSID, MAC identification, Indication of connection status, power adjustment, mode selection, reset to default by WebUI, SNMP V2.0 |
| Power source |
Power Over Ethernet (POE)
AC 100~240V; DC 48V/0.4A (max.) |
| Directive compliance |
CE/FCC |
| Dimension |
232x185x62mm/unit |
| Weight |
4 Kg/with all accessories |
|
