PA-2327-204
 Highlights:
- 2.3GHz, 802.11g, 500mW
- Enhanced Outdoor AP/client/Repeater/Bridge
- 802.11g, 54Mbps, up to 20Km
- Plastic outdoor unit, water-proof, operating under -15C ~ 65C
- Least gain loss of antennas, highest transmission efficiency
- In-built 500mW 802.11g booster, output 500mW, up to 20Km
- Data rate & sensitivity Indication for antenna alignment
- LED indication (3) for TX/RX, LAN, operation indications (easy diagnosis by sight)
- POE (Power over Ethernet) design, highest stability
Specification |
| Output power |
27dBm (500mW) |
| Frequency |
2300MHz~2383.5MHz |
| Number of Channel |
14 |
| Modulation |
CCK, DQPSK, DBPSK, OFDM |
| RF Signal type |
DSSS |
| Standard |
IEEE802.11g; IEEE802.3; IEEE802.3u |
| Antenna connector |
SMA female |
| Lighten protection |
In-built 3 arrestors, withstand 6KV |
| Coverage |
Up to 20Km with 16-dbi yagi antenna |
Operating Mode
(Programmable) |
AP/Bridge(WDS)/Client/Repeater
(Programmable) |
| SDRAM |
8MB |
| FLASH |
2MB |
| Data Rate |
54/48/36/24/18/12/6Mbps auto fallback |
| Management Software |
Web based GUI Interface, Web browser supported configuration & firmware upgrade, DHCP client |
| Sensitivity/Bandwidth |
-88dBm: 11Mbps, PER < 8%
-74dBm: 54Mbps, PER < 10% |
| Distance/Bandwidth |
5Mbps @ 20Km (802.11b) |
| 17Mbps @ 7Km (802.11g) |
| Operating Temperature |
-15 C ~ 65 C |
| Security |
64-bit/128-bit/152-bit encryption system
Wi-Fi protected Access (WPA) |
| Power source |
AC 100~240V; DC 48V/0.4A |
| Weight of each unit |
5Kg/unit (including cables and all accessories) |
|
