PA-2430-2417
 Highlights:
- 802.11g/802.11b
- RF output power amplifier, available for all 2.4GHz Access Point and Bridge unit
- Extending signal transmission for 10Km~25Km
- TX/RX LEDs Indication
- Auto gain adjustment. (AGC)
- Outdoor unit, weather proof
- DC power feed through RF cable (POE)
- Immediate, low-cost, easy solution for magnifying the limited RF output power of the existing AP or Bridge device to 1 Watt (30dBm)
- True Outdoor unit, weather-proof, operating under –30C ~ 70C
- Least gain loss of antennas, highest transmission efficiency
- POE (Power over Ethernet) design, best performance with most stability
Specifications |
| Output power |
1 Watt |
| Frequency Range |
2400~2500Mhz |
| Max. Coverage |
25Km |
| Antenna type |
Omni, flat panel, parabolic grid |
| Transmit Gain |
Up to 24dB |
| Receiver Gain |
15~18dB, 17 dB typical |
| TX Input Power |
0 dBm ~ 23 dBm (Max) |
| Noise Figure |
3.5 dB typical |
| Connectors |
N-type, 50 Ohm |
| Power Consumption |
TX: <1A / RX: 160mA @ 9 VDC |
| Power Source |
AC 110~220V
DC 12V/2A |
| LED Indication |
Transmit: Green / Receive: Red |
| Operating Temperature |
-40 C ~ + 70 C |
| Dimension |
142x79x31mm (AMP)
142x79x31mm (DC injector) |
| Weight |
1.5Kg/set |
|
