PA-2429-1212
Highlights:
 2.4GHz, 1-watt Bi-directional Amplifier for WLAN
(802.11g)- 802.11g compliance
- Immediate, low-cost, easy solution for magnifying the limited RF output power of the existing AP or Bridge device to 1 Watt (29dBm)
- TX/RX LEDs Indication
- Auto gain adjustment (AGC)
- Outdoor weather proof
- DC power feed through RF cable (POE design)
- True Outdoor unit, weather-proof, operating under –30C ~ 70C
- Least gain loss of antennas, highest transmission efficiency
- POE (Power over Ethernet) design, best performance with most stability
| Specifications |
| Output
power |
29dBm
(+/- 1 dBm) |
| Frequency
Range |
2400~2500Mhz |
| Standard
|
802.11g |
| Operating
mode |
Bi-directional TDD |
| Transmit
Gain |
Up to 12dB |
| Receiver
Gain |
12~15dB,
12 dB typical |
| TX
Input Power |
5dB
(min)/20dB (max) |
| Noise
Figure |
3.5 dB typical |
| Frequency
Response |
+/- 1 dB |
| Connectors |
N-type, 50 Ohm |
| Power
Consumption |
TX: <1A / RX: 160mA @ 9 VDC |
| Lightening
Protection |
Quarter Wave Technology |
| LED
Indication |
Transmit: Green / Receive: Red |
| Operating
Temperature |
-30 C ~ + 70 C |
| Dimension |
110x60x31mm |
| Weight |
1.2Kg/set |
|
