Contact Us - Shopping Cart - Careers
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Search this site...
1
1
1
1
1

 

We are a proud member of NATE National Association
of Tower Erectors

NATE

PCCA

Home > Antennas > Interad > Model 5002 - Discone Antenna

Interad® Model 5002 - Discone Antenna

Interad Model 5002 Discone Antenna

Antenna Systems & Solutions, Inc. is pleased to present the Interad® Model 5002 - Discone Antenna. If you have any questions, please feel free to contact us.

Frequency 100 to 1200 MHz
Pattern Omnidirectional
Polarization Vertical
Gain 1.8 dBi
Impedence 50 Ohm
VSWR 1.8:1
Power Handling 500 Watts CW
RF Connector Type "N" female
Construction Material Aluminum
Finish Epoxy White Paint
Mast Diameter 1.25 O.D.
Weight 15 lbs
Buy Now

Notes / Precautions

Lightning Protection:

When top mounting an antenna, proper grounding procedures to the tower must be observed. You MUST provide a direct DC earth ground to both the antenna and tower. This can and will minimize lightning strikes from damaging equipment. Alway's consult your local and national codes for grounding requirements.

Side Mounting Antennas:

When side mounting, the minimum distance that the antenna should be located away from the mounting structure is a quarter of a wavelength. Many installations will require greater distances due to pattern shape requirements. Please consult the antennas specification sheets.

 
ICRA LOGO


Home | Antennas | Arrestors | Attenuators | Broadband | Cable Assemblies | Coaxial Cables & Connectors | Grounding | RF Detection & Jamming | Radios | Radio Loggers | Repeaters | Shelters | Trap & Trace | Tools | Towers | Tripod/Pan & Tilt | Waveguides

©Copyright 2008  Antenna Systems & Solutions, Inc. All Rights Reserved. All trademarks are properties of their respective owners.

 

>