403-470 MHz
Antenna Inputs.All antenna VSWR value are specified with
7/8" EIA connectors. Other optional inputs may result in
equal or slightly higher VSWR.
Type Number |
Diameter ft(m) |
Gain,dBi Mid-Band |
VSWR max.(R.L., db) |
|
|
6(2.0) |
16.3 |
1.35(16.5) |
|
|
8(2.4) |
17.5 |
1.35(16.5) |
|
|
10(3.0) |
19.6 |
1.35(16.5) |
|
|
13(4.0) |
22.2 |
1.35(16.5) |
|
|
6.6*3.3 (2*1) |
13.5 |
1.35(16.5) |
|
|
 KP, KPR F-Series GRIDPAK® Antennas
Andrew KP and KPR F-Series Parabolic GRIDPAK antennas are solutions for low wind loading situations. These grid antennas are single polarized either horizontally or vertically, depending on assembly configuration and typically operate in bands below 3.7 GHz. KP and KPR F-Series Parabolic GRIDPAK antennas use foam-filled feeds, eliminating pressurization requirements. This type of feed also acts as a gas barrier when air dielectric transmission line is used. |
 MKP Series Mini-GRIDPAK® Antennas
MKP Series Mini-GRIDPAK antennas are small, rectangular aperture antennas for low frequency applications (below 900 MHz). GRIDPAK and Mini-GRIDPAK antennas should be considered when low wind loads onto supporting structures are required and/or when low shipping cost is important. |
|
