1.427-15.35 GHz
Antenna Inputs. All antenna VSWR values specified with 7/8"
EIA connectors. Other optional inputs may result in equal or slightly
higher VSWR.
Pressurization. Feeds are pressurizable to 10 Ib/in2 (70kPa)
Type Number |
Diameter ft(m) |
Gain, dBi Mid- Band |
VSWR max.(R.L.,dB) |
|
|
4(1.2) |
23.0 |
1.15(23.1) |
|
|
6(1.8) |
26.5 |
1.10(26.4) |
|
|
8(2.4) |
29.0 |
1.10(26.4) |
|
|
10(3.0) |
31.0 |
1.10(26.4) |
|
|
|
|
|
|
|
4(1.2) |
23.4 |
1.30(17.7) |
|
|
6(2.0) |
27.1 |
1.20(20.8) |
|
|
8(2.4) |
28.7 |
1.20(20.8) |
|
|
10(3.0) |
30.7 |
1.15(23.1) |
|
|
13(4.0) |
33.1 |
1.15(23.1) |
|
|
P, PL, PX and PXL Series Standard Parabolic Antennas
P, PL, PX, and PXL Series Standard Parabolic antennas are unshielded parabolic antennas that provide economical and reliable service where a high degree of back and side radiation suppression is not necessary.
- Low-VSWR versions minimize echo distortion for less noise on the system
- A vertical tower mount is included. Optional mounts and radomes can be ordered separately for versatility of installation
- Single and dual polarized options are available in most applicable frequencies
- Spun aluminum reflectors provide long term reliability and minimize environmental distortion to protect system investments
- Rugged, high quality performance at low initial costs
|
 KP, KPR F-Series GRIDPAK® Antennas
Andrew KP and KPR F-Series Parabolic GRIDPAK antennas are solutions for low wind loading situations. These grid antennas are single polarized either horizontally or vertically, depending on assembly configuration and typically operate in bands below 3.7 GHz. KP and KPR F-Series Parabolic GRIDPAK antennas use foam-filled feeds, eliminating pressurization requirements. This type of feed also acts as a gas barrier when air dielectric transmission line is used.
The KPR F-Series antennas are suitable for low to medium capacity systems such as Rural Telephony Multi-Access Radio Systems (MARS). They incorporate a HELIAX® foam cable jumper assembly in the feed design. This jumper assembly can be terminated with any connector that can be fit onto Andrew LDF4-50A HELIAX coaxial cable. |
|
